Compatible Genuine Comfort GCDM PTAC units feature a removable universal power cord that connects to the unit inside the electrical junction box.
Follow the instructions below to correctly install or replace the LCDI power cord.
Before Installation
- Disconnect the unit from the electrical receptacle.
- Verify that the replacement power cord is compatible with your GCDM model, voltage and amperage requirements.
- Inspect the power cord and connectors for damage.
Important: Electrical installation and power cord replacement should be performed by qualified personnel.
Video Instructions
Watch the video below for a demonstration of how to connect the power cord to your GCDM unit.
Step 1: Access the Junction Box
- Remove the front panel of the unit.
- Locate the metal junction box at the bottom right of the unit.
- Remove the screws securing the junction box cover.
Step 2: Connect the LCDI Power Cord
- Align the power cord connectors with the corresponding connections inside the junction box.
- Ensure both parts of the connector are fully inserted and securely connected.
- Secure the power cord using the designated wire clamp.
Incomplete connections may result in power supply or heating issues.
Step 3: Reinstall the Junction Box Cover
Reinstall the junction box cover and secure it with the original screws. Ensure no wires are pinched.
Step 4: Reinstall the Front Panel
Reinstall the front panel and ensure it is securely positioned.
Step 5: Connect Power and Test the Unit
- Connect the power cord directly to a compatible electrical receptacle.
- Verify that the unit powers on.
- Confirm proper heating and cooling operation.
Do not use an extension cord or receptacle adapter.
Additional Resources
Need Assistance?
Contact technical@genuinecomfort.com with your unit's model number, serial number and power cord amperage for assistance.